Televes OLT 769401 User Manual Download Page 269

Page: 269 / 482

269

7.6.10.1.7.3 “config” command

Name

config

Description

Configure client service parameters.

Full path

/interfaces/ethernet/services/config

Mandatory Parameters

--serviceID-client

Screen Output

Table 7-165: “config” command information

/cli/interfaces/ethernet/services> config ?

Usage CONFIG:

CONFIG Configure client service parameters.

--serviceID-client Choose a client service by ID.

[OPTIONAL]

--admin Administrative State. Enable/disable, in this context.

(enable|disable)

--dhcp-op18 DHCP Op.18 flag

--dhcp-op37 DHCP Op.37 flag

--dhcp-op82 DHCP Op.82 flag

--igmp IGMP (enable|disable)

--mac-limit Specifies the maximum number of MAC addresses allowed for

a given client service (unlimited or 1..99)

--max-bandwidth Set the multicast group maximum bandwidth in Kbps

(unlimited or 0..100000000)

--max-groups Set the maximum number of multicast groups (unlimited or

0..16384)

--name Set a name for this Client Service (STRING 65)

--nni-ctag Inner VLAN ID (client) on the network-facing (Ethernet)

interface. (1..4094)

--remoteID Remote ID field added to DHCP packets in DHCPop.82

enabled services. (STRING 63)

--serviceID Select an OLT service by ID.

--uni-ctag VLAN ID delivered/received from the (Ethernet)

subscriber-facing interface at the ONU. (1..4094)

--upstream-eth-profile-id Choose an existing upstream Ethernet profile by ID

--use-global-dhcp-ops Use DHCP options defined in the OLT global service.

Figure 7-190: CLI on line help on “config” command usage in this node context

7.6.10.1.7.4 “remove” command

Name

remove

Description

Remove an existing service

Full path

/interfaces/ethernet/services/remove

Mandatory Parameters

--serviceID-client

Screen Output

Table 7-166: “remove” command information

Summary of Contents for OLT 769401



































































































































































































































































































































































































































































































Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands

Televes OLT 769401, User Manual

Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands