Televes OLT 769401 User Manual Download Page 252

Page: 252 / 482

Descripción del producto

252

7.6.8.1 “command” command

Name

command

Description

Execute a command on a given Protection entity.

Full path

/eth-protection/command

Mandatory Parameters

--ID
--type

Screen Output

Table 7-:128 “command” command information

/cli/eth-protection> command ?

Usage:

COMMAND Execute a command on a given Protection entity.

--ID Identifies a table entry by ID, in this context.

--type Identify the command to execute (clear|lockout|force-to-

protection|force-to-working|manual-to-protection|manual-to-working)

Figure 7-154: CLI on line help on command “command” usage in this node context

7.6.8.2 “config” command

Name

config

Description

Configure one Protection Group parameters.

Full path

/eth-protection/config

Mandatory Parameters

--ID

Screen Output

Table 7-129: “config” command information

/cli/eth-protection> config ?

Usage:

CONFIG Configure ethernet Protection Group parameters.

--ID Identifies a table entry by ID, in this context.

[OPTIONAL]

--admin Administrative State. Enable/disable, in this context.

(enable|disable)

--hold-off-time Hold Off Time (0..100) x100ms

--hp-lc-fail high priority: Generalized Line Card Failure (enable|disable)

--hp-los high priority: Generalized LOS (enable|disable)

--p-port Identifies the Protecting Interface ID.

--reversible Specify is reversion is enabled (enable|disable)

--w-port Identifies the Working Interface ID.

--wtr-time Wait to Restore Time (WTR) (5..12) min

Figure 7-155: CLI on line help on “config” command usage in this node context

Summary of Contents for OLT 769401



































































































































































































































































































































































































































































































Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands

Televes OLT 769401, User Manual

Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands