Televes OLT 769401 User Manual Download Page 354

Page: 354 / 482

Descripción del producto

354

/cli/profiles/voip/specific> config ?

Usage CONFIG:

CONFIG Configure an existing profile.

--profileID Identifies a profile by ID.

[OPTIONAL]

--admin Administrative State. Enable/disable, in this context.

(enable|disable)

--ftp-ip Set the FTP server IP address

--name Define a name for this profile. (STRING 15)

Figure 7-379: CLI on line help on “configure” command usage in this node context

7.6.16.6.2.2 “create” command

Name

create

Description

Create a voip specific profile

Full path

/profiles/voip/specific/create

Mandatory Parameters

Screen Output

Table 7-343: “create” command information

/cli/profiles/voip/specific> create ?

Usage CREATE:

CREATE Create a new VoIP specific profile.

[OPTIONAL]

--admin Administrative State. Enable/disable, in this context.

(enable|disable)

--ftp-ip Set the FTP server IP address

--name Define a name for this profile. (STRING 15)

Figure 7-:380 CLI on line help on “create” command usage in this node context

7.6.16.6.2.3 “remove” command

Name

remove

Description

Remove an existing profile

Full path

/profiles/voip/specific/remove

Mandatory Parameters

--profileID

Screen Output

Table 7-344: “remove” command information

Summary of Contents for OLT 769401



































































































































































































































































































































































































































































































Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands

Televes OLT 769401, User Manual

Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands