Televes OLT 769401 User Manual Download Page 402

Page: 402 / 482

Descripción del producto

402

7.6.17.8.3.3 “stop-transfer” command

Name

stop-transfer

Description

Stop an ongoing image transfer to a given ONU.

Full path

/remote-eq/status/firmware/stop-transfer

Mandatory Parameters

--imageID

Screen Output

Table 7-436: “stop-transfer” command information

/cli/remote-eq/status/firmware> stop-transfer ?

Usage:

STOP-TRANSFER Stop an ongoing image transfer to a given ONU.

[OPTIONAL]

--onuID

Identifies an ONU by ID, in this context.

--port

Identifies an interface on the OLT. (e.g.: pon.2; eth.3; lag.1)

Figure 7-471: CLI on line help on “stop-transfer” command usage in this node context

7.6.17.8.4 “gem-port” sub-node

7.6.17.8.4.1 “statistics” sub-node

7.6.17.8.4.1.1 “show” command

Name

show

Description

Show the GEM packet statistics for a given ONU.

Full path

/remote-eq/status/gem-port/statistics/show

Mandatory Parameters

--remote-port

Screen Output

Table, Figure 7-473. Table parameters description in Table 7-438.

Table 7-437: “show” command information

/cli/remote-eq/status/gem-port/statistics> show ?

Usage:

SHOW Show the GEM packet statistics for a given ONU.

[OPTIONAL]

--onuID

Identifies an ONU by ID, in this context.

--port

Identifies an interface on the OLT. (e.g.: pon.2; eth.3; lag.1)

Figure 7-472: CLI on line help on “show” command usage in this node context

Figure 7-473: Output of ”show” command in this node context

Summary of Contents for OLT 769401



































































































































































































































































































































































































































































































Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands

Televes OLT 769401, User Manual

Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands