background image

RPx400 Trouble Shooting Guide

Can I use the RPx 400 USB Capabilities with Windows 98, ME, or Mac OS 9.X?

 

Drivers will be available soon.  Check http://www.digitech.com for updates.

Audio playback from Pro Tracks has pops and clicks.

 

Try the Wave Profiler under Options->Audio.  This seems to fix most problems.
Otherwise, try using MME drivers in the Options->Audio->Advanced, Driver Mode
selection.  These are the safest drivers but also have the most latency.

 

Try increasing the latency slider in the audio settings.

Hands-Free recording on RPx 400 doesn’t work or has stopped working.

 

If it was working at one point but has stopped working, try exiting Pro Tracks and then
restarting it (make sure to save your project).

 

Cycle power to the RPx 400 before entering Pro Tracks or X Edit.

 

If it has never worked at all, there is a problem with USB MIDI.  The most probable
causes are using incorrect or incorrectly installed drivers and/or .dll or a bad USB
cable.

 

See the section on driver installation.

I can’t hear audio playback from Pro Tracks.

 

If the ‘Reamp’ mode in the RPx 400 is active try switching to a different mode like
‘Stereo’.

 

Make sure the faders in Pro Tracks are turned up.

 

Check that the tracks you want to playback are un-muted.

 

Go to Options->Audio->Drivers and under output drivers, select ‘DigiTech USB 1-2
In/Out’ and de-select everything else.

 

See the section on driver installation.

I get computer system sounds through my RPx 400.

 

To disable computer sounds from going to the RPx 400, go to the ‘Sounds and Audio
Devices’ section of the ‘Control Panel’ and select a default playback device other than
DigiTech USB.

My RPx 400 doesn’t record to Pro Tracks.

 

Go to Options->Audio->Drivers and under input drivers, select ‘DigiTech USB 1-2
In/Out’ and ‘DigiTech USB 3-4 In Only’ De-select everything else.

 

Make sure the proper drivers are installed.

 

See the section on driver installation.

 

For an initial track, make sure ‘Reamp’ mode in the RPx 400 is not used.

All manuals and user guides at all-guides.com

all-guides.com

Summary of Contents for RPX400







Reviews: