Televes OLT 769401 User Manual Download Page 215

Page: 215 / 482

215

Table 7-49: “show” command information

/cli/applications> manager/show ?

Usage:

SHOW Show the current management configuration

Figure 7-69: CLI on line help on “show” command usage in this node context

Figure 7-70: Output of ”show” command in this node context

Parameter

Description

Manager ID

Manager IP

Manager IPv4 address

Admin

Administrative State.

Trap Mode

Used Trap mode for the OLT to communicate with Network Management

System. (none|Trap/Ack|Trap V2| Inform)

Permissions

Manager permissions in the equipment (READ|READ/CONFIGURE)

Send Port

Used IP port number to send traps

Buffer size(bytes)

trap buffer size

Interval (s)

Waiting period of time before re-sending the trap when no ACK is received

Retries

Number of retries before skipping the current trap

Table 7-50: show command output table parameters

7.6.2.3 “olt-upgrade” sub-node

7.6.2.3.1 “apply-file” command

Name

apply-file

Description

Updates OLT-OS with the last imported setup file. The system will reboot to use

the new image.

Full path

/applications/olt-upgrade/apply-file

Mandatory Parameters

This command has no parameters

Screen Output

Table 7-51: “apply-file” command information

/cli/applications> olt-upgrade/apply-file ?

Usage:

APPLY-FILE Update OLT-OS with the last imported setup file. The system will reboot

to use the new image.

Figure 7-71: CLI on line help on “apply-file” command usage in this node context

Summary of Contents for OLT 769401



































































































































































































































































































































































































































































































Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands

Televes OLT 769401, User Manual

Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands