Televes OLT 769401 User Manual Download Page 337

Page: 337 / 482

337

7.6.16.1.3 “remove” command

Name

remove

Description

Remove an existing profile

Full path

/profiles/dscp-to-pbits/remove

Mandatory Parameters

--ID

Screen Output

Table 7-305: “remove” command parameters

/cli/profiles/dscp-to-pbits> remove ?

Usage REMOVE:

REMOVE Remove an existing profile.

--ID Identifies a table entry by ID, in this context.

Figure 7-342: CLI on line help on “remove” command usage in this node context

7.6.16.1.4 “show” command

Name

show

Description

Show existing profiles

Full path

/profiles/dscp-to-pbits/show

Mandatory Parameters

This command has no parameters

Screen Output

Table, Figure 7-344 and Figure 7-345. Tables’ parameters description, Table

7-307 and Table 7-308.

Table 7-306: “show” command information

//cli/profiles/dscp-to-pbits> show ?

Usage SHOW:

SHOW Show existing profiles.

[OPTIONAL]

--ID Identifies a table entry by ID, in this context.

Figure 7-343: CLI on line help on “show” command usage in this node context

Figure 7-344: Output of ”show” command without arguments in this node context

Summary of Contents for OLT 769401



































































































































































































































































































































































































































































































Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands

Televes OLT 769401, User Manual

Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands