Televes OLT 769401, User Manual

Page: 37 / 482

EN
37
Frequency Accuracy (Wander), based on:
TIE - time interval error
MTIE - maximum time interval error
MRTIE - maximum relative time interval error
TDEV – time deviation
Packet Delay Variation (PDV)
2.13 Support Multiple Trap Destination Servers
The OLT supports the forwarding of traps to multiple simultaneous servers (up to 3), including:
Trap v2
INFORM
Trap/ACK - SNMPV1 traps with ACK. The acknowledge is made by writing at the alarm table’s alarmAkn (.1.3.6.1.4.1.4746.1
0.6.1.1.1.10)
The Trap/ACK type is specific for use with PTIN’s Management System. Only one IP may have set the type ‘TRAP-ACK’ (limited implementation).
Trap v2 and Inform are standard.
The UDP port can be configured to send traps, default 162 (standard).
2.14 External Alarm Conditions
Two external input alarm conditions are supported.
2.15 Managers’ Configuration
It is possible to configure the IPs of managers, and set the reading and configuration permissions for each of them.
It is also possible to configure static IP routes for the management interfaces
2.16 Connectivity Fault Management (CFM)
Connectivity Fault Management (CFM) complies with Y.1731/IEEE 801.2ag standards.
This functionality is used in the 10GE Ethernet interfaces CFM probing configuration.
2.17 Reboot Features
The following reboot options are supported by the OLT system:
Support the option to perform a system reboot