Televes OLT 769401 User Manual Download Page 329

Page: 329 / 482

329

Parameter

Description

Admin

IGMP Proxy Administrative State

Priority

pbit value in the IGMP packets (0<=n<=7)

Network version

IGMP version used in the Network interfaces (2|3)

Client version

IGMP version used in the Client interfaces (2|3)

Robustness

Specifies the number of retransmissions sent. Should be adjusted for the

expected packet loss on the network.

Unsolicited Report Interval

Time interval between repetitions of a host’s initial group membership report.

Max Records per Report

Maximum number of group-records that can be included in the same

membership report.

Table 7-289: “show” command output table parameters

7.6.15.3.2.3 ”showconfig” command

Name

showconfig

Description

Print the command list that enforces the current configuration

Full path

/multicast/igmp/proxy/showconfig

Mandatory Parameters

This command has no parameters

Screen Output

Full command(s) path and used arguments and values to reach the current

configuration.

Table 7-290: “showconfig” command information

/cli/ multicast/igmp/proxy> showconfig ?

Usage:

SHOWCONFIG Print the command list that enforces the current configuration

Figure 7-326: CLI on line help on “showconfig” command usage in this node context

7.6.15.3.3 ”querier” sub-node

7.6.15.3.3.1 ”config” command

Name

config

Description

Configure the IGMP querier information.

Full path

/multicast/igmp/querier/config

Mandatory Parameters

Screen Output

Table 7-291: “config” command information

Summary of Contents for OLT 769401



































































































































































































































































































































































































































































































Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands

Televes OLT 769401, User Manual

Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands