Televes OLT 769401, User Manual

Page: 18 / 482

Descripción del producto
18
2.4 Interoperability
The OLT system assures layer 2 and layer 3 interoperability with the transport segment of the network, according to Rec BBF TR-156, Figure 2-7.
Figure 2-7: Multiservice architecture &requirement, interoperability (BBF TR-156)
2.5 PLOAM
The PLOAM channel is message based and is carried in a dedicated space of the downstream XGTC frame and upstream XGTC burst. This channel
is used for all PMD and XGTC management information that is not sent via the embedded OAM channel.
The OLT systems comply with ITU-T G.987.3 (10/2010) – 10-Gigabit-capable Passive Optical Networks physical media dependent layer specification.
This Recommendation describes the transmission convergence layer for 10-Gigabit-capable passive optical network systems.
2.6 OMCI
The OLT systems comply with ITU-T G.988 (10/2012) - ONU management and control interface (OMCI) specification.
G.988 recommendation specifies the managed entities of a protocol-independent management information base (MIB) that models the exchange
of information between an optical line termination (OLT) and an optical network unit (ONU).
Configuration of OMCI channel encryption is supported.
2.6.1 ONU Related OLT OS Supported Features
The following ONU related software features are supported by the OLT OS:
Changing the upstream profile of a given ONU without disconnecting the respective service
A command “Disable Serial Number” per ONU
ONU Authentication by Password
A command to reset all ONUs
A command to disable the ONU Auto-Discovery mechanism