Televes OLT 769401 User Manual Download Page 221

Page: 221 / 482

221

/cli/applications> time/time-zone/config ?

Usage:

CONFIG Configure time-zone information.

[OPTIONAL]

--central-manager-time-zone Select the time zone of the central manager. (string or

ID from table ‘availableValues’) (STRING 63)

--local-time-zone

Select the time zone of the current equipment. (string or

ID from table ‘availableValues’) (STRING 63)

Figure 7-83: CLI on line help on “config” command usage in this node context

7.6.2.4.2.3 “show” command

Name

show

Description

Displays the current time zone configuration.

Full path

/applications/time/time-zone/show

Mandatory Parameters

This command has no parameters

Screen Output

Table, Figure 7-, table parameters described Table 7-

Table 7-64: “show” command information

/cli/applications> time/time-zone/show ?

Usage:

SHOW Display the current time zone configuration.

Figure 7-84: CLI on line help on “show” command usage in this node context

Figure 7-85: Output of ”show” command in this node context

Parameter

Description

Reference

Indicates the currently used reference used either by the equipment (Local)

and the Network Management Platform

Time Zone

Indicates the currently used Time Zone

Table 7-65: “show” command output table parameters

Summary of Contents for OLT 769401



































































































































































































































































































































































































































































































Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands

Televes OLT 769401, User Manual

Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands