Televes OLT 769401 User Manual Download Page 406

Page: 406 / 482

Descripción del producto

406

/cli/remote-eq/status/services/statistics/counters> show ?

Usage:

SHOW

Show the statistics for a given ONU service, whose counter has

already been activated.

--serviceID-onu

Choose a ONU service by ID.

[OPTIONAL]

--onuID

Identifies an ONU by ID, in this context.

--port

Identifies an interface on the OLT. (e.g.: pon.2; eth.3; lag.1)

Figure 7-480: CLI on line help on “show” command usage in this node context

Figure 7-481: Output of ”show” command in this node context

Parameter

Description

OLT Eth/LAG Interface || OLT PON

Interface (Rx/Tx)

OLT Eth/LAG or PON Interface as applicable for the selected Service.
Rx/Tx counter values for the applicable interface

Total

Total number of packets

Unicast

Total number of Unicast packets

Multicast

Total number of Multicast packets

Broadcast

Total number of Broadcast packets

Dropped

Total number of Dropped packets

Table 7-446: “show” command output table parameters

7.6.17.8.5.3.1.3 “show-active” command

Name

show-active

Description

Display all active counters.

Full path

/remote-eq/status/services/statistics/counters/show-active

Mandatory Parameters

Screen Output

Table, Figure 7-483. Table parameters description in Table 7-448.

Table 7-447: “show-active” command information

Summary of Contents for OLT 769401



































































































































































































































































































































































































































































































Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands

Televes OLT 769401, User Manual

Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands