Televes OLT 769401, User Manual

Page: 179 / 482

EN
179
/cli/ip> tree
+ ip[@apply, @save]
+ interfaces[]
+ inband[@config, @show, @showconfig]
+ ip[@config, @show, @showconfig]
+ networking[@config, @show, @showconfig]
+ route[@create, @remove, @show, @showconfig]
Figure 7-6: IP tree, sub-nodes and commands
7.3.2.2 Common Usage Commands
Set of commands usable in different node and sub-node, conserving the name and syntax for consistency, but whose arguments vary depending
on the context, in number, type (optional/mandatory) and range of values.
Name Purpose
show
Displays relevant information in a table format.
config Modifies the configuration of various parameters
showconfig
Generates a list of commands that replicates the current configuration of
the node where the command is executed. When executed with the option
+recursive generates the same list to all descendent nodes.
create Creates a new entity on the node where the command was executed
remove Removes an entity on the node where the command was executed
Table 7-1: Common Usage Commands
7.3.2.3 Command Structure
A command has a name and may have arguments (parameters) of type mandatory or optional.
For the execution of the command, command name must be used and if existing, mandatory arguments, with the correct command syntax.
Use Description
Command
Command name
Parameters(s)
Parameters can be mandatory or optional
--param=value Syntax for the argument and the respective value
<value> Value for each argument
<value1 | value2 > Possible values are separated with |
<value1 : value2 > Range of possible values: all values from value1 to value2
<[value1] | value2 > Default values are given with brackets ([ ])
Table 7-2: CLI command structure
Examples Description
/services/show
Will run the command
show
in the node
services
.
The command does not need any arguments
/equipment/boards/config --slot=3 --admin=true
Will run the command
config
in the node boards.
The command takes two arguments, slot with value 3 and
admin with value true.
This command will activate the board on slot 3
Table 7-3: CLI command examples