Televes OLT 769401 User Manual Download Page 425

Page: 425 / 482

425

7.6.19.1 “availableValues” command

Name

availableValues

Description

Show the available <slot-port> combination values for creating new

services.

Full path

/services/availableValues

Mandatory Parameters

This command has no parameters

Screen Output

Table Figure 7-526.Table parameters description Table 7-489

Table 7-488: “availableValues” command information

/cli/services> availableValues ?

Usage:

AVAILABLEVALUES Show the available <slot-port> combination values for creating

new services.

Figure 7-525: CLI on line help on “availableValues” command usage in this node context

Figure 7-526: Output of ”availableValues” command in this node context

Parameter Group

Parameter

Description

Availabe Uplink interfaces

Slot

Indicates the slots with uplink interfaces

Interfaces

Indicates the OLT uplink interfaces

Availabe Downlink interfaces

Slot

Indicates the slots with downlink interfaces

Interfaces

Indicates the OLT interfaces

Table 7-489: “availableValues” command output Uplink/Downlink table parameters

7.6.19.2 “config” command

Name

config

Description

Configure parameters for a given service. Flags PPPoE, McFlood, IGMP

and DHCP are ignored for Bitstream services

Full path

/services/config

Mandatory Parameters

--serviceID

Screen Output

Table 7-490: “config” command information

Summary of Contents for OLT 769401



































































































































































































































































































































































































































































































Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands

Televes OLT 769401, User Manual

Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands