Televes OLT 769401 User Manual Download Page 323

Page: 323 / 482

323

Parameter

Description

(ID) Service

Indicates the service identifier (ID) and name

Static

Indicates if the channel is Static

Indicates the IPv4 multicast address

Source

Indicates the multicast Source

Table 7-276: “status” command output table parameters

7.6.15.2 “group-list” sub-node

7.6.15.2.1 ”config” command

Name

config

Description

Configure an existing multicast group.

Full path

/multicast/group-list/config

Mandatory Parameters

--ID

Screen Output

Table 7-277: “config” command information

/cli/multicast/group-list> config ?

Usage CONFIG:

CONFIG Configure an existing multicast group.

--ID Identifies a table entry by ID, in this context.

[OPTIONAL]

--admin Administrative State. Enable/disable, in this context.

(enable|disable)

--bandwidth Specify the multicast group bandwidth in units of Kbps

--group-mask Group IPv4 address mask (0 | 22..32)

--ip-address IPv4 address

--name Set a name for the specified multicast group. (STRING 31)

--serviceID Select an OLT service by ID.

--src-ipv4-addr Specify the source IPv4 address or ‘any’ to specify any IP

--static-group Configure the multicast group as dynamic(default) or as static

Figure 7-313: CLI on line help on “config” command usage in this node context

7.6.15.2.2 ”create” command

Name

create

Description

Create a new multicast group

Full path

/ multicast/group-list /create

Mandatory Parameters

--ip-address
--name
--serviceID

Screen Output

Table 7-278: “create” command information

Summary of Contents for OLT 769401



































































































































































































































































































































































































































































































Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands

Televes OLT 769401, User Manual

Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands