Televes OLT 769401 User Manual Download Page 214

Page: 214 / 482

Descripción del producto

214

About the sw-version parameter:

OFF

– this ONT does not have a software version specified. See the

/applications/firmware-upgrade

node for more

information.

AUTO

– this ONT has the software version set to automatically. This ONT will receive software updates from the default file

for the configured profile. See the

/applications/firmware- upgrade

node for more information.

text

– Insert a valid sw-version or create a new one. This ONT will only receive updates executed as

“planned”

from the files

that have a matching sw-version.

7.6.2.2 “manager” sub-node

This sub-node can be used to update the firmware of several ONTs in one operation (in /applications/firmware-upgrade/onu-upgrade node).

The /applications/firmware-upgrade/files node is used to manage the local firmware repository.

7.6.2.2.1 “config” command

Name

config

Description

Configures management information

Full path

/applications/manager/config

Mandatory Parameters

--ID

Screen Output

Table 7-48: “config” command information

/cli/applications> manager/config ?

Usage:

CONFIG Configure management information

--ID

Identifies a table entry by ID, in this context.

[OPTIONAL]

--admin Administrative State. Enable/disable, in this context. (enable|disable)

--buffer-size Specify the trap buffer size in bytes (informs only).

--interval Wait the specified period of seconds before re-sending the trap when no

ACK is received (informs only).

--ip-address IPv4 address

--ip-port Identifies the IP port number to use. (1..65535)

--permissions Allow this manager to READ or READ/CONFIGURE on this equipment (ro|rw)

--retries Number of retries before skipping the current trap (informs only).

--trap-mode Specify the trap mode (none|trap-ack|trap-v2|inform)

Figure 7-68: CLI on line help on “config” command usage in this node context

7.6.2.2.2 “show” command

Name

show

Description

Shows the current management configuration

Full path

/applications/manager/show

Mandatory Parameters

This command has no parameters

Screen Output

Table,Figure 7-70; table parameters description in Table 7-50

Summary of Contents for OLT 769401



































































































































































































































































































































































































































































































Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands

Televes OLT 769401, User Manual

Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands