Televes OLT 769401 User Manual Download Page 209

Page: 209 / 482

209

/cli/applications/firmware-upgrade> files/export ?

Usage EXPORT:

EXPORT Send an existing file to a TFTP server.

--fileID Identifies a file by ID, in this context.

--ip-address IPv4 address

[OPTIONAL]

--ip-port Identifies the IP port number to use. (1..65535)

--remote-file The Path/to/file on the TFTP server. (STRING 255)

Figure 7-56: CLI on line help on “export” command usage in this node context

7.6.2.1.1.4 “import” command

Name

import

Description

Sends an existing file to a TFTP server.

Full path

/applications/firmware-upgrade/files/import

Mandatory Parameters

--file-name
--ip-address
--profileID
--remote-file
--sw-version

Screen Output

Table 7-38: “import” command information

/Usage IMPORT:

IMPORT Import a new file from a TFTP server

--file-name Specify the file name (STRING 47)

--ip-address IPv4 address

--profileID Identifies a profile by ID.

--remote-file The Path/to/file on the TFTP server. (STRING 255)

--sw-version Set the software version for a given file. (STRING 31)

[OPTIONAL]

--asw-version Set the active software version for a given file. (STRING 31)

--description Set a description for the specified file. (STRING 47)

--hw-version Set the hardware version for a given file. (STRING 31)

--ip-port Identifies the IP port number to use. (1..65535)

Figure 7-57: CLI on line help on “import” command usage in this node context

7.6.2.1.1.5 “remove” command

Name

remove

Description

Removes an existing file from the repository.

Full path

/applications/firmware-upgrade/files/remove

Mandatory Parameters

No mandatory parameters

Screen Output

Summary of Contents for OLT 769401



































































































































































































































































































































































































































































































Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands

Televes OLT 769401, User Manual

Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands