Televes OLT 769401 User Manual Download Page 29

Page: 29 / 482

2.10 PON

2.10.1 Splitting Ratio Options

OLT system GPON ports currently support a splitting ratio of 1:64 in accordance with ITU-T rec. G.984.

2.10.2 Supported PON Classes

The OLT system currently supports B+ and C+ PON interfaces.

2.11 Protection

2.11.1 OLT Supported Protection Mechanisms

The following protection mechanisms are supported by the OLT system:

     GPON type-B protection
     Uplink 1:1 protection
     LACP
     ERPS

2.11.1.1 Type B Redundancy for GPON Ports

Configuration of type B redundancy for GPON ports (according to G.984), is a functionality that enables the protection of a GPON port with

another GPON port.

This feature is hardware enabled on the OLT system. It 1 GPON port protection for at least 4k ONTs (margin for splitter N:2 & 20km).

Figure 2-13: Type B redundancy for GPON ports

Summary of Contents for OLT 769401



































































































































































































































































































































































































































































































Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands

Televes OLT 769401, User Manual

Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands