Televes OLT 769401 User Manual Download Page 429

Page: 429 / 482

429

Type

Identifies the type of service:

Unicast

: Bidirectional service, where each frame has only one final destination.

These services are used in Residential applications, where some kinds of packets

can be trapped and processed (ex. DHCP, IGMP). In case of Unstacked Services,

MAC Learning is performed.

Multicast

: Unidirectional Service, where one frame can be delivered to several

destinations. These destinations are controlled by IGMP Snooping/Proxy.

UniVoIP

: Bidirectional Service, where each frame has only one final destination.

Similar to Unicast Services, with the difference that when it’s configured to the

ONU, VoIP configurations are downloaded to the ONU.

Bitstream

: Bidirectional Service, where each frame has only one final destination.

These services are used in Business applications, where all packets pass

transparently by the system and MAC learning is disabled.

Stacked

Provides the frame format in the uplink interface. If it’s Stacked the frame contains

two vlan tags, if it’s Unstacked the frame contains only one vlan tag. Both vlans

have Ethertype=0x8100.

MC Flood

Indicates Multicast flooding. configuration for a given service(enable|disable)

DHCP

Identifies if the service must work has a DHCP Relay Agent.

PPPoE

Indicates PPPoE configuration for a given service. (enable|disable)

IGMP

Indicates IGMP configuration for a given service. (enable|disable)

NNI S-TAG

Identifies the outer tag of the service used in the uplink port

UNI C-TAG

Identifies the VLAN delivered/received to/from the ONU. After this VLAN can be

translated in the ONU.

Table 7-494: “show” command output table parameters

This command used with serviceID parameter provides detailed information on the specified service configuration,

Figure 7-532: Output of ”show” command used with parameter –serviceID, in this node context

Summary of Contents for OLT 769401



































































































































































































































































































































































































































































































Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands

Televes OLT 769401, User Manual

Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands