Televes OLT 769401 User Manual Download Page 224

Page: 224 / 482

Descripción del producto

224

/cli/backup-manager> remove ?

Usage REMOVE:

REMOVE Deletes an existing backup file.

--local-file A file name on the local repository. (STRING 63)

Figure 7-91: CLI on line help on “remove” command usage in this node context

7.6.3.6 “restore” command

Name

restore

Description

Apply a backup file to the current system. The equipment will reboot.

Full path

/backup-manager/restore

Mandatory Parameters

--local-file

Screen Output

Table 7-72: “restore” command information

/cli/backup-manager> restore ?

Usage:

RESTORE Apply a backup file to the current system. The equipment will reboot.

--local-file A file name on the local repository. (STRING 63).

Figure 7-92: CLI on line help on “restore” command usage in this node context

7.6.3.7 “show” command

Name

show

Description

Display a table with all existing backup files.

Full path

/backup-manager/show

Mandatory Parameters

This command has no parameters

Screen Output

Table, Figure 7-; table parameter description in Table 7-.

Table 7-73: “show” command information

/cli/backup-manager> show ?

Usage:

SHOW Display a table with all existing backup files.

Figure 7-93: CLI on line help on “show” command usage in this node context

Summary of Contents for OLT 769401



































































































































































































































































































































































































































































































Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands

Televes OLT 769401, User Manual

Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands