Televes OLT 769401 User Manual Download Page 360

Page: 360 / 482

Descripción del producto

360

7.6.17.5.3 “config” command

Name

config

Description

Identify an ONU by (1)(slot,port,onuID) or (2)(serial-number). To modify the

serial-number use (1)(2).

Full path

/remote-eq/discovery/config

Mandatory Parameters

Screen Output

Table 7-355: “config” command information

/cli/remote-eq/discovery> config ?

Usage CONFIG:

CONFIG Configure one ONU parameters.

[OPTIONAL]

--admin Administrative State. Enable/disable, in this context.

(enable|disable)

--fec-upstream Forward Error Correction (FEC) on the Upstream side.

(enable|disable)

--omci-encryption Encryption on the OMCI channel. (enable|disable)

--onuID Identifies an ONU by ID, in this context.

--port Identifies an interface on the OLT. (e.g.: pon.2; eth.3; lag.1)

--profileID Identifies a profile by ID.

--sw-upgrade-mode Set the upgrade mode for this ONU. By choosing ‘planned’ the

argument ‘sw-version’ must be given as well. (off|auto|planned)

--sw-version Define a string to match with a firmware file sw-version string.

(STRING 15)

Figure 7-393: CLI on line help on “config” command usage in this node context

7.6.17.5.4 “create” command

Name

create

Description

Create a new ONU.

Full path

/remote-eq/discovery/ create

Mandatory Parameters

--onuID
--port
--profileID

Screen Output

Table 7-356: “create” command information

Summary of Contents for OLT 769401



































































































































































































































































































































































































































































































Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands

Televes OLT 769401, User Manual

Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands