Televes OLT 769401 User Manual Download Page 309

Page: 309 / 482

309

7.6.11.4 “networking” sub-node

7.6.11.4.1 “config” command

This command configures the Ethernet and Inband management interfaces

Name

config

Description

Configures the current management interface.

Full path

/ip/networking/config

Mandatory Parameters

Screen Output

Table 7-247: “config” command information

/cli/ip/networking> config ?

Usage:

CONFIG Configure

[OPTIONAL]

--mgmt-interface Choose the management interface to use.

Figure 7-278: CLI on line help on “config” command usage in this node context

7.6.11.4.2 “show” command

This command displays general information on the system configuration, indicating the interfaces available in the system for Inband configuration

and showing current InBand configuration.

Name

show

Description

Show the current configuration.

Full path

/ip/networking/show

Mandatory Parameters

This command has no parameters

Screen Output

Table Figure 7-280 Table parameters description in Table 7-249

Table 7-248: “show” command information

/cli/ip/interfaces/ip> show ?

Usage:

SHOW Show the current configuration

Figure 7-279: CLI on line help on “config” command usage in this node context

Figure 7-280: Output of ”show” command in this node context

Summary of Contents for OLT 769401



































































































































































































































































































































































































































































































Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands

Televes OLT 769401, User Manual

Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands