Televes OLT 769401 User Manual Download Page 408

Page: 408 / 482

Descripción del producto

408

7.6.17.8.5.3.1.5 “stop” command

Name

stop

Description

Disable an active counter on the given ONU service.

Full path

/remote-eq/status/services/statistics/counters/stop

Mandatory Parameters

--serviceID-onu

Screen Output

Table 7-450: “stop” command information

/cli/remote-eq/status/services/statistics/counters> stop ?

Usage:

STOP Disable an active counter on the given ONU service.

--serviceID-onu Select an ONU service by ID.

[OPTIONAL]

--onuID Identifies an ONU by ID, in this context.

--port Identifies an interface on the OLT. (e.g.: pon.2; eth.3; lag.1)

Figure 7-485: CLI on line help on “stop” command usage in this node context

7.6.17.8.5.3.2 “dhcp” sub-node

7.6.17.8.5.3.2.1 “show” command

Name

show

Description

Show the DHCP statistics for a given unicast service that has DHCPop82 enabled.

Full path

/remote-eq/status/services/statistics/dhcp/show

Mandatory Parameters

--serviceID-onu

Screen Output

Table, Figure 7-487. Table parameters description in Table 7-452.

Table 7-451: “show” command information

/cli/remote-eq/status/services/statistics/dhcp> show ?

Usage:

SHOW

Show the DHCP statistics for a given unicast service that has DHCPop82

enabled.

--serviceID-onu Choose an ONU service by ID.

[OPTIONAL]

--onuID

Identifies an ONU by ID, in this context.

--port

Identifies an interface on the OLT. (e.g.: pon.2; eth.3; lag.1)

--slot

Identifies a slot. (not used for LAG)

Figure 7-486: CLI on line help on “show” command usage in this node context

Summary of Contents for OLT 769401



































































































































































































































































































































































































































































































Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands

Televes OLT 769401, User Manual

Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands