Televes OLT 769401 User Manual Download Page 389

Page: 389 / 482

389

Figure 7-448: Output of ”show” command in this node context

Parameter

Description

ONU Service ID

Identifies an ONU Service by ID

P-Queue

Indicates Service P-Queue

P-bits

Indicates used P-bits

T-CONT (Upstream Profile)

Indicates used T-CONT

Table 7-408: “show” command output table parameters

7.6.17.6.8.6.3 “showconfig” command

Name

showconfig

Description

Print the command list that enforces the current configuration

Full path

/remote-eq/onu/services/t-cont-mapping/showconfig

Mandatory Parameters

Screen Output

Full command(s) path and used arguments and values to reach the current

configuration.

Table 7-409: “showconfig” command information

/cli/remote-eq/onu/services/t-cont-mapping> showconfig ?

Usage:

SHOWCONFIG Print the command list that enforces the current configuration

[OPTIONAL]

--onuID Identifies an ONU by ID, in this context.

--port Identifies an interface on the OLT. (e.g.: pon.2; eth.3; lag.1)

Figure 7-449: CLI on line help on “showconfig” command usage in this node contex

7.6.17.6.9 “system” sub-node

7.6.17.6.9.1 “config” command

Name

config

Description

Configures system information for the specified ONU

Full path

/remote-eq/onu/system/config

Mandatory Parameters

Screen Output

Table 7-410: “config” command information

Summary of Contents for OLT 769401



































































































































































































































































































































































































































































































Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands

Televes OLT 769401, User Manual

Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands