Televes OLT 769401 User Manual Download Page 262

Page: 262 / 482

Descripción del producto

262

Parameter

Description

Interface ID (number )

Name

Name of the board inserted in a slot

Admin

Interface administrative state

LAG

Lag identification

Timeout

Timeout used by the LACPDUs packets (short|long)

Media Type

Interface standard

Flow Control

(enabled|disabled)

MTU

Maximum transfer unit (number)

ESMC

SSM packets over ESMC Channel sending (enabled|disabled)

IP Src Guard

IP Source Guard filtering for the specified interface; Flag (enable|disable)

Table 7-148: “show” command output table parameters

7.6.10.1.3 “showconfig” command

Name

showconfig

Description

Print the command list that enforces the current configuration

Full path

/cli/interfaces/Ethernet/showconfig

Mandatory Parameters

This command has no parameters

Screen Output

Full command(s) path and used arguments and values to reach the current

configuration.

Table 7-149: “showconfig” command information

/cli/interfaces/ethernet> showconfig ?

Usage:

SHOWCONFIG Print the command list that enforces the current configuration

Figure 7-177: CLI on line help on “showconfig” command usage in this node context

7.6.10.1.4 “cos” sub-node

This node is used to manage CoS configuration of ethernet interfaces.

7.6.10.1.4.1 “config” command

Name

config

Description

Configure CoS information for Eth interfaces.

Full path

/interfaces/ethernet/cos/config

Mandatory Parameters

--cos
--port

Screen Output

Table 7-150: “config” command information

Summary of Contents for OLT 769401



































































































































































































































































































































































































































































































Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands

Televes OLT 769401, User Manual

Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands