Televes OLT 769401 User Manual Download Page 187

Page: 187 / 482

187

Multiple configuration and management operations using the same set of values for this group may be required in the same remote equipment.

The

connect

command defines the three arguments (slot/port/ontID) and values in a single operation. A command in this node-sub-tree (remote

equipment) uses this information as needed.

Configuration on a connected ONT with other different argument (Slot, Port, ontID) values than those defined in the initial connect command

arguments, takes precedence over the information stored in the connect command.

Summary of Contents for OLT 769401



































































































































































































































































































































































































































































































Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands

Televes OLT 769401, User Manual

Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands