Televes OLT 769401 User Manual Download Page 390

Page: 390 / 482

Descripción del producto

390

/cli/remote-eq/onu/system> config ?

Usage:

CONFIG Configure

[OPTIONAL]

--contact

Set contact information as appropriate

--description

Set a description, in this context.

--location

Set the system location as appropriate

--name

Insert a name STRING.

--onuID

Identifies an ONU by ID, in this context.

--port

Identifies an interface on the OLT. (e.g.: pon.2; eth.3; lag.1)

Figure 7-450: CLI on line help on “config” command usage in this node context

7.6.17.6.9.2 “show” command

Name

show

Description

Show the current configuration

Full path

/ remote-eq/onu/system/show

Mandatory Parameters

Screen Output

Table, Figure 7-452. Table parameters description in Table 7-412.

Table 7-411: “show” command information

/cli/remote-eq/onu/system> show ?

Usage:

SHOW Show the current configuration

[OPTIONAL]

--onuID

Identifies an ONU by ID, in this context.

--port

Identifies an interface on the OLT. (e.g.: pon.2; eth.3; lag.1)

Figure 7-451: CLI on line help on “show” command usage in this node context

Figure 7-452: Output of ”show” command in this node context

Summary of Contents for OLT 769401



































































































































































































































































































































































































































































































Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands

Televes OLT 769401, User Manual

Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands