Televes OLT 769401 User Manual Download Page 276

Page: 276 / 482

Descripción del producto

276

/cli/interfaces/ethernet/services/statistics/igmp> show ?

Usage SHOW:

SHOW Show the IGMP statistics for a given multicast client service.

--port Identifies an interface on the OLT. (e.g.: pon.2; eth.3; lag.1)

--serviceID-client Choose a client service by ID.

Figure 7-205: CLI on line help on “show” command usage in this node context

7.6.10.1.8 “statistics” sub-node

7.6.10.1.8.1 “show” command

Name

show

Description

Show the current ethernet statistics.

Full path

/interfaces/ethernet/statistics/show

Mandatory Parameters

--port

Screen Output

Table, Figure 7-207 Table parameters description in Table 7-182.

Table 7-181: “show” command information

/cli/interfaces/ethernet/ statistics>show ?

Usage:

SHOW Show the current ethernet statistics.

--port Identifies an interface on the OLT. (e.g.: pon.2; eth.3; lag.1)

Figure 7-206: CLI on line help on “show” command usage in this node context

Figure 7-207: Output of ”show” command in this node context

Summary of Contents for OLT 769401



































































































































































































































































































































































































































































































Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands

Televes OLT 769401, User Manual

Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands