Televes OLT 769401 User Manual Download Page 60

Page: 60 / 482

Descripción del producto

5.2.3 WebTi General Description

The WebTi is divided in three different areas: Menu, Heading and Main Page.

These three areas are marked in Figure 5-7.

Figure 5-7: WebTi Areas

If using CLI, a CMD window should be used and CLI command run in this window. CLI has an hierarchical structure with nodes and subnodes. The

prompt indicates where in the navigation tree the user is currently positioned. In each node/subnode a set of command is available depending on

the particular node/subnode. CLI general usage indications are provided in 7.3 CLI and subsections.

In the menu all the options to configure and check the equipment status are available. By clicking on “+” the menu expands or “-“ the menu

collapses to the original position.

The main window displayed content corresponds to the selected item in the menu, Figure 5-8.

Summary of Contents for OLT 769401



































































































































































































































































































































































































































































































Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands

Televes OLT 769401, User Manual

Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands