Televes OLT 769401 User Manual Download Page 343

Page: 343 / 482

343

/cli/profiles/onu> create ?

Usage CREATE:

CREATE Create a new ONU profile.

[OPTIONAL]

--admin Administrative State. Enable/disable, in this context.

(enable|disable)

--model Define the Model Name (STRING 47)

--name Define a name for this profile. (STRING 47)

--port-num The number of ports for a given port type (max: 4 ETH , 1 PON , 1 RF

, 2 VoIP, 4 E1, 1 VEIP )

--port-type The type of a port (eth|pon|voip|rf|e1|veip)

--profileID Identifies a profile by ID.

--vendor Define the Vendor Name (STRING 15)

Figure 7-354: CLI on line help on “create” command usage in this node context

7.6.16.3.3 “remove” command

Name

remove

Description

Remove an ONU profile

Full path

/profiles/onu/remove

Mandatory Parameters

--profileID

Screen Output

Table 7-318: “remove” command parameters

/cli/profiles/onu> remove ?

Usage:

REMOVE Remove

--profileID

Identifies a profile by ID.

Figure 7-355: CLI on line help on “remove” command usage in this node context

7.6.16.3.4 “show” command

Name

show

Description

Show the current configuration

Full path

/profiles/onu/show

Mandatory Parameters

This command has no parameters

Screen Output

Table, Figure 7-357. Table parameters description, Table 7-320.

Table 7-319: “show” command information

/cli/profiles/onu> show ?

Usage:

SHOW Show the current configuration.

Figure 7-356: CLI on line help on “show” command usage in this node context

Summary of Contents for OLT 769401



































































































































































































































































































































































































































































































Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands

Televes OLT 769401, User Manual

Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands