Televes OLT 769401 User Manual Download Page 317

Page: 317 / 482

317

7.6.14 “mac-table” node

/cli/mac-table> tree

+ mac-table[@config, @show, @showconfig]

+ status[]

+ gpon[@remove, @show]

+ switch[@remove, @show]

Figure 7-299: mac-table node tree

7.6.14.1 ”config” command

This command configures the mac-table switch parameters

Name

config

Description

Configures the mac-table switch parameters.

Full path

/mac-table/config

Mandatory Parameters

--mac-aging

Screen Output

Table 7-265: “config” command information

/cli/mac-table> config ?

Usage:

CONFIG Configure

--mac-aging

Define the MAC aging time in seconds (10..1000000)

Figure 7-300: CLI on line help on “config” command usage in this node context

7.6.14.2 “show” command

This command displays the Aging Time which defines the maximum time each MAC address can be at the MAC table when no packet with that

MAC address arrives to the system.

Name

show

Description

Show the current configuration.

Full path

/mac-table/show

Mandatory Parameters

This command has no parameters

Screen Output

Table Figure 7-. Table parameters description in Table 7-

Table 7-266: “show” command information

/cli/mac-table> show ?

Usage:

SHOW Show the current configuration

Figure 7-301: CLI on line help on “show” command usage in this node context

Summary of Contents for OLT 769401



































































































































































































































































































































































































































































































Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands

Televes OLT 769401, User Manual

Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands