Televes OLT 769401, User Manual

Page: 80 / 482

Descripción del producto
80
Parameter Description
ETH id
Port identifier
High Layer In case the port belongs to a LAG, identifies to each LAG the port belongs to
Timeout
Indicates the timeout used by the LACPDU’s packets (long=30s and short=1s)
Admin Port Administrative State
Media Type
Link Speed and Duplex
Flow Control Activates the transmission and processing of Pause Frames (always disabled)
MTU
Defines de maximum size of a packet that can be transferred in on frame over a network
ESMC Ethernet Synchronization Messaging Channel: Enable/Disable
Table 5-19: Ethernet interface configuration parameters
5.2.4.6 LAG Interfaces
The LAG interfaces provide the system with Aggregation, Protection and Load Balancing of the uplink interfaces. It’s possible to
add/remove/configure.
In CLI, LAG Interfaces related commands including configuration are described in section 7.6.10.3 “lag” sub-node and subsections
Figure 5-33: LAG interfaces configuration
Parameter Description
LAG Id Lag interface identifier
Eth Id Ethernet Interfaces associated with the LAG
Admin Port Administrative State
Static
Indicates if the LAG is Static (doesn’t transmit nor process LACPDU packets) or dynamic (transmits
and processes LACPDU packets)
Load Balancing
Criteria
Traffic Load Balancing of the LAG interface, there are three options:
SMAC: Source MAC
DMAC:
Destination MAC
SMAC&DMAC: Source and Destination MAC
Mapping
Allows changing the LAG interface ports association by selecting Modify link. This link opens a
Mapping dialog box in order to do LAG configuration, Figure 5-34.
Table 5-20: LAG interfaces configuration parameters table
By pressing the “Add” button, it will be added a new line with the first LAG id available.
In order to associate the ports to the LAG the Modify link under Mapping Column must be selected, and then it will appear the
Mapping dialog box in order to do LAG configuration, Figure 5-34