Televes OLT 769401 User Manual Download Page 383

Page: 383 / 482

383

/cli/remote-eq/onu/services> add ?

Usage ADD:

ADD Add an OLT service to a specific ONU.

--name Define a name for the ONU Client Service. (STRING 65)

--serviceID Select an OLT service by ID.

[OPTIONAL]

--add-onu-port Attach an ONU interface to an ONU service. See available values

by executing the command ‘availableValues’.

--admin Administrative State. Enable/disable, in this context.

(enable|disable)

--dhcp-op18 DHCP Op.18 flag

--dhcp-op37 DHCP Op.37 flag

--dhcp-op82 DHCP Op.82 flag

--encryption Enable or disable encryption.

--ethernet-profileID View available Ethernet profile IDs in /profiles/ethernet (use

zero for no profile)

--igmp IGMP (enable|disable)

--ip-mgmt If enabled, use this service for IP management of the ONU

(enable|disable)

--mac-limit Specifies the maximum number of MAC addresses allowed for a

given client service (unlimited or 1..99)

--max-bandwidth Set the multicast group maximum bandwidth in Kbps (unlimited or

0..100000000)

--max-groups Set the maximum number of multicast groups (unlimited or

0..16384)

--nativeVlan All traffic through the client port will be untagged, upstream

and downstream. (enable|disable)

--nni-ctag Inner VLAN ID (client) on the network-facing (Ethernet)

interface. (1..4094)

--onuID Identifies an ONU by ID, in this context.

--pbits-to-pq-profile-id Specify an existing P-bits to Priority Queue Profile

--port Identifies an interface on the OLT. (e.g.: pon.2; eth.3; lag.1)

--remoteID Remote ID field added to DHCP packets in DHCPop.82 enabled

services. (STRING 63)

--serviceID-onu Choose a ONU service by ID.

--uni-ctag VLAN ID delivered/received from the (Ethernet) subscriber-

facing interface at the ONU. (1..4094)

--upstream-dba-profile-id (mandatory for non-multicast services) View available Upstream

DBA profile IDs in /profiles/upstream-dba

--use-global-dhcp-ops Use the DHCP options defined in the OLT global service.

(enable|disable)

Figure 7-438: CLI on line help on “add” command usage in this node context

7.6.17.6.8.2 “availableValues” command

Name

availableValues

Description

Show the available values for argument ‘remote-port’

Full path

/profiles/voip/server/ availableValues

Mandatory Parameters

Screen Output

Table, Figure 7-440.Table parameters description in Table 7-400.

Table 7-399: “availableValues “ command information

Summary of Contents for OLT 769401



































































































































































































































































































































































































































































































Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands

Televes OLT 769401, User Manual

Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands