Televes OLT 769401 User Manual Download Page 370

Page: 370 / 482

Descripción del producto

370

/cli/remote-eq/onu/e1> config-lsp ?

Usage:

CONFIG-LSP Configure LSP Ig/Eg parameters for a given ONU E1 interface.

--ID Identifies a table entry by ID, in this context.

--lsp-egress Egress LSP label (16..1048575)

--lsp-ingress Ingress LSP label (16..1048575)

[OPTIONAL]

--onuID Identifies an ONU by ID, in this context.

--port Identifies an interface on the OLT. (e.g.: pon.2; eth.3; lag.1)

Figure 7-413: CLI on line help on “config-lsp” command usage in this node context

7.6.17.6.4.3 “config-pw” command

Name

config-pw

Description

Configure Pseudowire Ig/Eg parameters for a given ONU E1 interface.

Full path

/remote-eq/onu/e1/config-pw

Mandatory Parameters

-ID

Screen Output

Table 7-375: “config-pw” command information

/cli/remote-eq/onu/e1> config-pw ?

Usage:

CONFIG-PW Configure Pseudowire Ig/Eg parameters for a given ONU E1

interface.

--ID Identifies a table entry by ID, in this context.

[OPTIONAL]

--onuID Identifies an ONU by ID, in this context.

--port Identifies an interface on the OLT. (e.g.: pon.2; eth.3; lag.1)

--pw-egress Egress pseudowire label (16..1048575)

--pw-ingress Ingress pseudowire label (16..1048575)

Figure 7-414: CLI on line help on “config-pw” command usage in this node context

7.6.17.6.4.4 “show” command

The show command used without parameters shows

information for the ONU specified with the command

/cli> /remote-eq/connect –onuID=xx –port=ccc.zz.

If there is no connected ONU, all the parameters must be specified to address the desired ONU otherwise the command will return an error

message: “No remote ONU specified”

Name

show

Description

Show the current configuration

Summary of Contents for OLT 769401



































































































































































































































































































































































































































































































Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands

Televes OLT 769401, User Manual

Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands