Televes OLT 769401 User Manual Download Page 401

Page: 401 / 482

401

7.6.17.8.3 “firmware” sub-node

This sub-node allows the manual management of the firmware that is active in a specific ONU.

For bulk operations on firmware versions, the node

/applications/firmware-upgrade

should be used.

7.6.17.8.3.1 “activate” command

Name

activate

Description

Forces an ONU to reboot and startup with the specified image.

Full path

/ remote-eq/status/firmware/activate

Mandatory Parameters

--imageID

Screen Output

Table 7-434: “activate” command information

/cli/remote-eq/status/firmware> activate ?

Usage:

ACTIVATE Forces an ONU to reboot and startup with the specified image.

--imageID

Identify an image by ID (0|1)

[OPTIONAL]

--onuID

Identifies an ONU by ID, in this context.

--port

Identifies an interface on the OLT. (e.g.: pon.2; eth.3; lag.1)

Figure 7-469: CLI on line help on “activate” command usage in this node context

7.6.17.8.3.2 “commit” command

Name

commit

Description

Indicates which of the images is used after the next reboot.

Full path

/remote-eq/status/firmware/commit

Mandatory Parameters

--imageID

Screen Output

Table 7-435: “commit” command information

/cli/remote-eq/status/firmware> commit ?

Usage:

COMMIT Indicates which of the images is used after the next reboot.

--imageID

Identify an image by ID (0|1)

[OPTIONAL]

--onuID

Identifies an ONU by ID, in this context.

--port

Identifies an interface on the OLT. (e.g.: pon.2; eth.3; lag.1)

Figure 7-470: CLI on line help on “commit” command usage in this node context

Summary of Contents for OLT 769401



































































































































































































































































































































































































































































































Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands

Televes OLT 769401, User Manual

Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands