Televes OLT 769401 User Manual Download Page 348

Page: 348 / 482

Descripción del producto

348

7.6.16.5.2 “create” command

Name

create

Description

Create a GPON upstream DBA profile

Full path

/profiles/upstream-dba/create

Mandatory Parameters

--fixedBW
--name
--type

Screen Output

Table 7-329: “create” Command information

/cli/profiles/upstream-dba> create ?

Usage CREATE:

CREATE Create a new profile.

--fixedBW Fixed bandwidth used in CBR and UBR types with a granularity of

8kbps.

--name Define a name for this profile. (STRING 31)

--type Identifies the profile type. (cbr|ubr|dyn)

[OPTIONAL]

--BWeligibility Defines how the non assured bandwidth is handled. (non-

assured|best-effort)

--admin Administrative State. Enable/disable, in this context.

(enable|disable)

--assuredBW Maximum bandwidth for DYN type with a granularity of 8kbps.

--dba Set the MAC GPON DBA algorithm to ‘Status Reporting’ if enabled,

or ‘Traffic Monitoring’ if disabled. (enable|disable)

--maxBW Maximum bandwidth that results from the sum: Fixed BW + Assured BW

+ bandwidth not assured.

--profileID Identifies a profile by ID.

Figure 7-366: CLI on line help on create command usage in this node context

7.6.16.5.3 “remove” command

Name

remove

Description

Remove a GPON upstream DBA profile

Full path

/profiles/upstream-dba/remove

Mandatory Parameters

--profileID

Screen Output

Table 7-330: “remove” command information

/cli/profiles/upstream-dba> remove ?

Usage:

REMOVE Remove

--profileID

Identifies a profile by ID.

Figure 7-367: CLI on line help on “remove” command usage in this node context

Summary of Contents for OLT 769401



































































































































































































































































































































































































































































































Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands

Televes OLT 769401, User Manual

Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands