Televes OLT 769401, User Manual

Page: 286 / 482

Descripción del producto
286
Screen Output
Full command(s) path and used arguments and values to reach the current
configuration.
Table 7-199: “showconfig” command information
/cli/interfaces/gpon/cos> showconfig ?
Usage:
SHOWCONFIG Print the command list that enforces the current configuration
Figure 7-225: CLI on line help on “showconfig” command usage in this node context
7.6.10.2.5 “dhcp” sub-node
7.6.10.2.5.1 “config” command
Name config
Description Configure DHCP mode parameter for the given interfaces.
Full path
/interfaces/gpon/dhcp/config
Mandatory Parameters
--port
--slot
Screen Output
No
Table 7-200: “config” command information
/cli/interfaces/gpon/dhcp> config ?
Usage CONFIG:
CONFIG Configure DHCP mode parameter for the given interfaces.
<MANDATORY>
--port Identifies an interface on the OLT. (e.g.: pon.2; eth.3; lag.1)
--slot Identifies a slot.
[OPTIONAL]
--is-trusted Set the DHCP mode {default: untrusted / mode: 0 - untrusted, 1 -
trusted}
Figure 7-226: CLI on line help on “config” command usage in this node context
7.6.10.2.5.2 “show” command
This command used without arguments provides information on all the equipment Cards with detailed dhcp configuration information available.
The command used with slot argument shows DHCP mode information for the specified HW slot.
Name show
Description
Shows DHCP mode information for a specific HW slot.
Full path /interfaces/gpon/dhcp/show
Mandatory Parameters
No
Screen Output
Table, Figure 7-228.Table parameters description in Table 7-202
Table 7-201: “show” command information