Televes OLT 769401 User Manual Download Page 345

Page: 345 / 482

345

Mandatory Parameters

--ID

Screen Output

Table 7-322: “config” command information

/cli/profiles/pbits-to-pq> config ?

Usage CONFIG:

CONFIG Configure/activate an existing profile.

--ID Identifies a table entry by ID, in this context.

[OPTIONAL]

--admin Administrative State. Enable/disable, in this context.

(enable|disable)

--name Define a name for the specified profile.

--p-bits Define the P-bits value (0..7).

--p-queue Specify the Priority Queue (0..7)

Figure 7-359: CLI on line help on “config” command usage in this node context

7.6.16.4.2 “create” command

Name

create

Description

Create a new profile that assigns P-bits to Priority Queues

Full path

/profiles/pbits-to-pq/create

Mandatory Parameters

Screen Output

Table 7-323: “create” command parameters

cli/profiles/pbits-to-pq> create ?

Usage CREATE:

CREATE Create a new profile that assigns P-bits to Priority Queues.

[OPTIONAL]

--ID Identifies a table entry by ID, in this context.

--admin Administrative State. Enable/disable, in this context.

(enable|disable)

--name Define a name for the specified profile.

--p-bits Define the P-bits value (0..7).

--p-queue Specify the Priority Queue (0..7)

Figure 7-360: CLI on line help on “create” command usage in this node context

7.6.16.4.3 “remove” command

Name

remove

Description

Remove an existing profile

Full path

/profiles/pbits-to-pq/remove

Mandatory Parameters

--ID

Screen Output

Summary of Contents for OLT 769401



































































































































































































































































































































































































































































































Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands

Televes OLT 769401, User Manual

Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands