Televes OLT 769401 User Manual Download Page 397

Page: 397 / 482

397

7.6.17.7 “statistics” sub-node

7.6.17.7.1 “fec” sub-node

7.6.17.7.1.1 “show” command

Name

show

Description

Show FEC statistics in the upstream direction

Full path

/remote-eq/statistics/fec/show

Mandatory Parameters

Screen Output

Table.

Table 7-424: “show” command information

/cli/remote-eq/statistics/fec> show ?

Usage:

SHOW Show FEC statistics in the upstream direction

[OPTIONAL]

--onuID

Identifies an ONU by ID, in this context.

--port

Identifies an interface on the OLT. (e.g.: pon.2; eth.3; lag.1)

Figure 7-464: CLI on line help on “show” command usage in this node context

7.6.17.8 “status” sub-node

7.6.17.8.1 “show” command

This command displays status information on all the parameters for the specified ONU:

Ethernet Status Table

Analog RF Status Table

GPON Status Table

Service Status Table

Firmware Status Table

Name

show

Description

Show status information on all the parameters for the specified ONU

Full path

/ remote-eq/status/show

Mandatory Parameters

Screen Output

Tables, Figure 7-466. Tables parameters description in Table 7-426 to Table

7-431

Table 7-425: “show” command information

Summary of Contents for OLT 769401



































































































































































































































































































































































































































































































Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands

Televes OLT 769401, User Manual

Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands