Televes OLT 769401 User Manual Download Page 263

Page: 263 / 482

263

/cli/interfaces/ethernet/cos> config ?

Usage:

CONFIG Configure CoS information for Eth interfaces.

--cos

Identifies a Class of Service (1..8)

--port

Identifies an interface on the OLT. (e.g.: pon.2; eth.3; lag.1)

[OPTIONAL]

--pcp-bits

Identifies the p-bits associated to the Class of Service. (0..7)

--profileID

Identifies a profile by ID.

--scheduler

Identifies the type of Scheduler (strict|weighted)

Figure 7-178: CLI on line help on “config” command usage in this node context

7.6.10.1.4.2 “show” command

This command provides information on all the equipment Ethernet interfaces CoS configuration: CoS traffic profile and scheduler policy.

Name

show

Description

Show the current CoS configuration.

Full path

/interfaces/ethernet/cos/show

Mandatory Parameters

Screen Output

Table Figure 7-180. Table parameter description in Table 7-152.

Table 7-151: “show” command information

/cli/interfaces/ethernet/cos> show ?

Usage:

SHOW Show the current CoS configuration

Figure 7-179: CLI on line help on “show” command usage in this node context

Figure 7-180: “show” command output in this node context – partial view

Summary of Contents for OLT 769401



































































































































































































































































































































































































































































































Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands

Televes OLT 769401, User Manual

Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands