Televes OLT 769401 User Manual Download Page 13

Page: 13 / 482

2.1 Services

2.1.1 Usage Scenarios

Figure 2-2. OLT services Usage Scenario

The OLT system Usage services scenario include the support the provision of:

NGN voice services: VoIP and ToIP softswitched controlled, including IP Centrex services and SIP Trunk services

Internet services: High speed internet in the order of Mbit/s to Gbit/s, with traffic prioritization and differentiation

Enhanced Multimedia Communications such as voice, presence, unified messaging, localization, Caller ID with IPTV,

controlled by an IMS CSCF(Call Session Control Function) platform,

Mobile Backhaul services:

Applicable to WiMAX, 2G, 3G and 4G (LTE) networks

Support transparent synchronization signals (frequency, phase and time) transport according to NTP and PTP Protocols

(IEEE 1588 v2 and telecom profile)

Provide BITs interface for the connection of an external MHz or Mbps clock reference

Video services:

IPTV

RF Video

Residential multiplay services:

Voice: Voice over IP (VoIP);

Internet: High Speed Internet Services;

RF Overlay: Analog Video using a different wavelength (1550nm);

IPTV: transport of Digital Video Services;

Business services:

TDM emulation services for E1 transport according to MEF-8 (CESoETH)

Carrier Ethernet services based on MEF 10.1 (E-LINE, E-LAN)

Business Ethernet Services TLS (Transparent VLAN Services)

BitStream (enterprise).

Summary of Contents for OLT 769401



































































































































































































































































































































































































































































































Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands

Televes OLT 769401, User Manual

Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands