Televes OLT 769401 User Manual Download Page 407

Page: 407 / 482

407

/cli/remote-eq/status/services/statistics/counters> show-active ?

Usage:

SHOW-ACTIVE Display all active ONU service counters.

[OPTIONAL]

--onuID

Identifies an ONU by ID, in this context.

--port

Identifies an interface on the OLT. (e.g.: pon.2; eth.3; lag.1)

Figure 7-482: CLI on line help on “show-active” command usage in this node context

Figure 7-483: Output of ”show-active” command in this node context

Parameter

Description

ONU Service (ID) Name

Indicates an ONU service by ID and Service Name with active counters

gathering service statistics

Table 7-448: “show-active” command output table parameters

7.6.17.8.5.3.1.4 “start” command

Name

start

Description

Activate one statistics counter on the given ONU service.

Full path

/remote-eq/status/services/statistics/counters/start

Mandatory Parameters

--serviceID-onu

Screen Output

Table 7-449: “start” command information

/cli/remote-eq/status/services/statistics/counters> start ?

Usage:

START Activate one statistics counter on the given ONU service.

--serviceID-onu Choose a ONU service by ID.

[OPTIONAL]

--onuID

Identifies an ONU by ID, in this context.

--port

Identifies an interface on the OLT. (e.g.: pon.2; eth.3; lag.1)

Figure 7-484: CLI on line help on “start” command usage in this node context

Summary of Contents for OLT 769401



































































































































































































































































































































































































































































































Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands

Televes OLT 769401, User Manual

Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands