Televes OLT 769401 User Manual Download Page 299

Page: 299 / 482

299

7.6.10.3.6 “cos” sub-node

This node is used to manage CoS configuration for each LAG.

7.6.10.3.6.1 “config” command

Name

config

Description

Configure CoS information for LAG interfaces.

Full path

/interfaces/lag/cos/config

Mandatory Parameters

--cos
--port

Screen Output

Table 7-226: “config” command information

/cli/interfaces/lag/cos> config ?

Usage:

CONFIG Configure CoS information for LAG interfaces.

--cos

Identifies a Class of Service (1..8)

--port

Identifies an interface on the OLT. (e.g.: pon.2; eth.3; lag.1)

[OPTIONAL]

--pcp-bits

Identifies the p-bits associated to the Class of Service. (0..7)

--profileID

Identifies a profile by ID.

--scheduler

Identifies the type of Scheduler (strict|weighted)

Figure 7-254: CLI on line help on “config” command usage in this node context

7.6.10.3.6.2 “show” command

This command used without arguments provides information on all the equipment LAG interfaces CoS configuration: CoS traffic profile and

scheduler policy. When used with the argument slot it displays that information only for the specific slot.

Name

show

Description

Show the current configuration.

Full path

/interfaces/lag/cos/show

Mandatory Parameters

Screen Output

Table Figure 7-256. Table parameter description in Table 7-228.

Table 7-227: “show” command information

/cli/interfaces/lag/cos> show ?

Usage:

SHOW Show the current configuration

[OPTIONAL]

--lag-id Identifies a LAG by ID. (0..14)

Figure 7-255: CLI on line help on show command usage in this node context

Summary of Contents for OLT 769401



































































































































































































































































































































































































































































































Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands

Televes OLT 769401, User Manual

Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands