Televes OLT 769401, User Manual

Page: 129 / 482

EN
129
6. Operation
This chapter addresses the Operation of the equipment via local management.
OLT current configuration information is available via WEB TI configuration windows which show for each configurable item, the current OLT
configuration
OLT current configuration information for a specific configurable OLT item can also be obtained via CLI application with the show, showconfig and
availableValues commands at the configurable Item context, ie tree node, sub-node or branch.
Information on the status of OLT configured logical and physical elements and statistics can be obtained via WEBTI status menu items.
OLT status and statistics information for a specific configurable OLT item can also be obtained via CLI application with the “status” an “statistics”
sub-nodes at the configurable Item context, ie tree node, sub-node or branch.
OLT alarms information can be obtained via WEBTI logs submenu alarms’ items.
Alarms information can also be obtained via CLI application node “logs” sub-node “alarms” commands.
6.1 Upgradingto a New OLT OS Software Release
6.1.1 Determining the Software Version
You can verify your OLT Ref.769401 OLT OS software version by checking the “Firmware version”;:
•
at the equipment WEBTI interface main window;
•
with CLI and the command /equipment/system/show;
6.1.2 Upgrading to a New Software Release
You can upgrade to a new software release for the OLT Ref.769401 Series OLT OS either using AGORA-NG NMS system or using a
LCT and CLI.
6.1.3 OLT OS Installation Procedure
Note:
In order to install OLT-OS, it is necessary to have 300MB free space available at the OLT switch fabric flash memory storage.
Step 1 Determine the Software Version you have installed on your OLT
You can verify your OLT Ref.769401 OLT OS software version by checking the “Firmware version”;:
A
t the equipment WEBTI interface main window;
With CLI and the command /equipment/system/show;
Step 2 Download the desired OLT Ref.769401 Series OLT OS version to perform upgrade of your OLT OS software from Open ideia.com to an
TFTP server.
Step 3 Login in the OLT Ref.769401 OLT using CLI admin account credentials.
Step 4
Import the new OLT Ref.769401 OLT-OS setup file using a TFTP client to the Local Craft Terminal, using the following command :
/applications/olt-upgrade/import
The IP address of the TFTP server and the the setup filename to import must be provided as mandatory parameters of the command. The path of
the olt setupfile to import from the TFTP server can also be specified at the command line.