Televes OLT 769401 User Manual Download Page 422

Page: 422 / 482

Descripción del producto

422

/cli/routing/traceroute> create ?

Usage CREATE:

CREATE Create a new traceroute session.

--ip-address IPv4 address

[OPTIONAL]

--dont-fragment Enable or disable fragmenting of the traceroute

probe (true/false)

--init-ttl Initial TTL for the traceroute probes. (1..255)

--max-fails Max number of failed probes for each hop before the

traceroute session in stopped. (0..255)

--max-ttl Max TTL for the traceroute probes. (1..255)

--port Destination port for the traceroute probe.

(0..65535)

--probe-interval Interval (in seconds) between each probe. (1..60)

--probe-size Probe size. (0..65507)

--probes-per-hop Number of probes to send. (1..10)

Figure 7-517: CLI on line help on “create” command usage in this node context

7.6.18.5.2 “remove” command

Name

remove

Description

Remove an existing traceroute session

Full path

/routing/traceroute/remove

Mandatory Parameters

-ID

Screen Output

Table 7-482: “remove” command information

/cli/routing/traceroute> remove ?

Usage REMOVE:

REMOVE Remove an existing traceroute session.

--ID Identifies a table entry by ID, in this context

Figure 7-518: CLI on line help on “remove” command usage in this node context

7.6.18.5.3 “show” command

Name

show

Description

Show the current configuration.

Full path

/routing/traceroute/show

Mandatory Parameters

No mandatory parameters

Screen Output

Table, Figure 7-520. Table parameters description in Table 7-484.

Table 7-483: “show” command information

Summary of Contents for OLT 769401



































































































































































































































































































































































































































































































Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands

Televes OLT 769401, User Manual

Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands