Televes OLT 769401 User Manual Download Page 216

Page: 216 / 482

Descripción del producto

216

7.6.2.3.2 “import” command

Name

import

Description

Imports a new OLT-OS setup file from a TFTP server.

Full path

/applications/olt-upgrade/import

Mandatory Parameters

--file-name

Screen Output

--ip-address

Table 7-52: “import” command information

/cli/applications> olt-upgrade/import ?

Usage:

IMPORT Import a new OLT-OS setup file from a TFTP server.

--file-name The path/to/olt/setup/filename to import from the TFTP server (STRING

255)

--ip-address IPv4 address

[OPTIONAL]

--ip-port Identifies the IP port number to use. (1..65535)

Figure 7-72: CLI on line help on “import” command usage in this node context

7.6.2.4 “time” sub-node

This sub-node can be used to update the firmware of several ONTs in one operation (in

/applications/firmware-upgrade/onu-upgrade

node).

The

/applications/firmware-upgrade/files

node is used to manage the local firmware repository

7.6.2.4.1 “ntp” sub-node

This sub-node allows the configuration of the NTP servers.

7.6.2.4.1.1 “config” Command

Name

config

Description

Configures an existing NTP server.

Full path

/applications/time/ntp/config

Mandatory Parameters

--ID

Screen Output

Table 7-53: “config” command information

Summary of Contents for OLT 769401



































































































































































































































































































































































































































































































Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands

Televes OLT 769401, User Manual

Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands