Televes OLT 769401 User Manual Download Page 211

Page: 211 / 482

211

Figure 7-61: Output of ”show” command with argument fileID in this node context

7.6.2.1.1.7 “status” command

Name

status

Description

Display existing problems with the file repository.

Full path

/applications/firmware-upgrade/files/status

Mandatory Parameters

No parameters

Screen Output

Table, Figure 7-63. Table parameters are described in Table 7-43

Table 7-42: “status” command information

/cli/applications/firmware-upgrade/files> status ?

Usage:

STATUS Display existing problems with the file repository.

Figure 7-62: CLI on line help on “status” command usage in this node context

Figure 7-63: Output of ”status” command in this node context

Parameter

Description

File identification (number)

Name

File name (text)

Status

File status. If Ok no problem exists with the file

Solution

Proposed solution for the identified problem

Table 7-43:”status” command output table parameters

Summary of Contents for OLT 769401



































































































































































































































































































































































































































































































Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands

Televes OLT 769401, User Manual

Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands