Televes OLT 769401 User Manual Download Page 393

Page: 393 / 482

393

7.6.17.6.10.3 “remove” command

Name

remove

Description

Remove a T-CONT from a specific ONU.

Full path

/remote-eq/onu/t-cont/remove

Mandatory Parameters

Screen Output

Table 7-416: “remove” command information

/cli/remote-eq/onu/t-cont> remove ?

Usage:

REMOVE Remove a T-CONT from a specific ONU.

[OPTIONAL]

--ID Identifies a table entry by ID, in this context.

--onuID Identifies an ONU by ID, in this context.

--port Identifies an interface on the OLT. (e.g.: pon.2; eth.3; lag.1)

Figure 7-456: CLI on line help on “remove” command usage in this node context

7.6.17.6.10.4 “show” command

Name

show

Description

Show T-CONT information on this ONU.

Full path

/remote-eq/onu/t-cont/show

Mandatory Parameters

Screen Output

Table, Figure 7-458. Table parameters description in Table 7-418..

Table 7-417: “show” command information

/cli/remote-eq/onu/t-cont> show ?

Usage:

SHOW Show T-CONT information on this ONU.

[OPTIONAL]

--onuID Identifies an ONU by ID, in this context.

--port Identifies an interface on the OLT. (e.g.: pon.2; eth.3; lag.1)

Figure 7-457: CLI on line help on “show” command usage in this node context

Figure 7-458: show command - output in this node context

Summary of Contents for OLT 769401



































































































































































































































































































































































































































































































Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands

Televes OLT 769401, User Manual

Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands