Televes OLT 769401 User Manual Download Page 380

Page: 380 / 482

Descripción del producto

380

/cli/remote-eq/onu/ext-vlan-tag-op/operation-table> showconfig ?

Usage:

SHOWCONFIG Print the command list that enforces the current configuration

[OPTIONAL]

--onuID Identifies an ONU by ID, in this context.

--port Identifies an interface on the OLT. (e.g.: pon.2; eth.3; lag.1)

Figure 7-432: CLI on line help on “showconfig” command usage in this node contex

7.6.17.6.7 “ptp-source” sub-node

7.6.17.6.7.1 “availableValues” command

Name

availableValues

Description

Show the available values for argument ‘add-onu-port’.

Full path

/remote-eq/onu/ptp-source/availableValues

Mandatory Parameters

Screen Output

Command not implemented.

Table 7-393: “availableValues” command information

/cli/remote-eq/onu/ptp-source> availableValues ?

Usage:

AVAILABLEVALUES Show the available values for argument ‘add-onu-port’.

[OPTIONAL]

--onuID

Identifies an ONU by ID, in this context.

--port

Identifies an interface on the OLT. (e.g.: pon.2; eth.3; lag.1)

Figure 7-433: CLI on line help on “availableValues” command usage in this node context

7.6.17.6.7.2 “config” command

Name

config

Description

Configure one ONU PTP source instance parameters.

Full path

/remote-eq/onu/ptp-source/config

Mandatory Parameters

--olt-ptp-port-ID

Screen Output

Table 7-394: “config” command information

Summary of Contents for OLT 769401



































































































































































































































































































































































































































































































Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands

Televes OLT 769401, User Manual

Search results

Summary of Contents for OLT 769401

Reviews:

Related manuals for OLT 769401

Brands by name

Popular brands