Televes OLT 769401, User Manual

Page: 228 / 482

Descripción del producto
228
/cli/cfm-probe> show ?
Usage:
SHOW Show the current CFM probe configuration
[OPTIONAL]
--ID Identifies a table entry by ID, in this context.
Figure 7-99: CLI on line help on “show” command usage in this node context
Figure 7-100: Output of ”show” command without arguments in this node context
Figure 7-101: Output of ”show” command with arguments slot and ID in this node context
Parameter Description
Slot
Slot to which the monitored Physical interface belongs to
ID CFM-probe ID
Admin CFM probe administrative state
Port
Physical interface that the probe is monitoring
MEP MEP Identification forwarded by the probe in the CCM message
RMEP
MEP ID of the remote MEP with which this probe makes P2P
Level
Probe OAM level, from 0-7
Operator (0, 1, 2)
Provider
(3, 4)
Customer (5, 6, 7)
Transmission Period
Forwarding period of the CCM frames
MEG ID/MAID Identification of the CFM maintenance group
VLAN
VLAN that encapsulates the CCM frame sent by the probe
Table 7-79: “show” command output table parameters
7.6.4.5 “showconfig” command
Name
showconfig
Description Prints the command list that enforces the current configuration.
Full path /cfm-probe/showconfig
Mandatory Parameters
This command has no parameters
Screen Output
Full command(s) path and used arguments and values to reach the current
configuration.
Table 7-: “showconfig” command information